15 kg, 6 kg
Waterproofing polyurethane modified membrane for protection and waterproofing of surfaces
KRAFT TOTAL PROOF TOP COAT is a high-performance water-proofing coating base polymer for waterproofing all types of surfaces as well as for the bridging and repairing small cracks and crevices (<2mm). Due to its unique technology forms a continuous elastic membrane highly resistant to UV radiation and weathering. It is specially designed for the protection of KRAFT TOTAL PROOF PU-S and the waterproofing of roofs, pipes, gutters, joints between roofs and vertical walls and planters. It presents high adhesion to various substrates such as cement, concrete, metal, tiles, wood, stone, brick, ceramics, PVC etc. It can be applied even on damp substrates, it dries fast, resists to ponding water and it is walkable. It contains no solvents thus it is user and environmentally friendly product.
This coating is certified as cool coating and it provides an excellent, highly protective barrier which reflects the sun’s heat. In turn, this helps to cool surfaces and leads to a reduction of interior temperatures and improvement to building’s energy eﬃciency.
» To ensure proper adhesion to the substrate, the surface must be smooth, clean and free of dust, oil, salt, rust, loose paint and residues, blistered paint etc. Maximum moisture content should not exceed 20%. Old, loose coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding machine.
» It is recommended that fresh concrete, stucco, plaster surfaces are allowed to dry for at least 4 weeks before the application of KRAFT TOTAL PROOF TOP COAT.
» Use suitable KRAFT repairing material or KRAFT sealant to fill joints, gaps and other damaged surfaces.|
» Apply KRAFT TOTAL PROOF TOP COAT with roller, brush or airless or air-assisted spray gun without dilution in one or two coats crosswise for waterproofing or for the protection of KRAFT TOTAL PROOF PU-S. Apply the second coat after 7 hours.
» At problematic areas apply the material in thicker film. It is recommended to reinforce these areas with KRAFT HYDROGUARD NET.
» Tools: Roller, brush, airless or air-assisted spray gun.
» Cleaning: The tools and spillages may be cleaned immediately with KRAFT NITRO 1100 solvent.
» Thinning: No thinning is required.
» Dry to Touch: 1-2 hours at 25oC and 50% relative humidity (drying times are longer at lower temperatures and at higher relative humidity).
» Dry to Recoat: 7 hours.
Stir well KRAFT TOTAL PROOF TOP COAT before use and during application.
» Do not apply at temperatures below 5°C or above 35°C or at humidity levels above 65%.
» Application of KRAFT TOTAL PROOF TOP COAT on warm weather conditions is recommended to be applied during the early morning hours, when the surface temperature of the roof is less than 30°C and not under direct sunlight.
» Do not apply if rain is imminent and for 4 hours.
» No foot traﬃc should be permitted on the coated surface for 24 hours.
» The material is fully cured after 7 days in favorable weather conditions.
15 kg, 6 kg